REC Twin Peak 2 Series

REC Twin Peak 2 Series

Description

Setting new standards in polycrystalline modules.
The range of REC TwinPeak solar modules use a series of unique and innovative technologies in a ground-breaking cell layout, to give you a high efficiency and high power output product based on a polycrystalline platform. With both 60-cell and 72-cell module sizes available, based on a design using 120 or 144 laser cut polysilicon cells respectively, the REC TwinPeak product family combines four different technologies which together, result in an extra power output of over 20 watts per module, a class-leading efficiency of up to
17.7% setting new standards for polycristalline solar modules.

Get more power out of the available space
Packing in the technological advancements shown below means REC TwinPeak solar modules give you more power output per square meter than the standard competition. This means that in areas with limited space, such as rooftops, you can fit in more electricity generation capacity and make maximum use of all available space.

Putting standard modules in the shade
One major advantage of REC’s TwinPeak technology compared to standard modules, is its ability to generate electricity even when partially shaded. This helps you to gain more energy yield over time from your installation. If a standard module is shaded, its power and the energy produced will sink drastically and even stop generating electricity completely if shaded across the module width.

REC TwinPeak solar modules are split into two twin sections which generate electricity independent to each other, but combine again before the current exits the module. This helps provide continuous electricity generation in the non-shaded section even at times of reduced irradiance on the module, increasing overall energy yield and installation profitability.

 

 

 

Features

  • High module conversion efficiency – up to 18%
  • Unique Twin Peak Technology – optimises panel for partial shading applications top and bottom
  • 120 half-cut multicrystalline PERC cells – 6 strings of 20 cells in series
  • 5 Busbar Solar Cell improves efficiency
  • PID Free
  • 3.2 mm solar glass with anti-reflection surface treatment
  • Entire module certified to withstand high wind loads (2400 Pascal) and snow loads (5400 Pascal)
  • Genuine MC4 Connectors
  • High salt mist and ammonia resistance
  • Operating temperature of -40°C – +85°C
  • Positive power tolerance of -0/+3%
  • 10 year warranty on material & workmanship – increases to 12 years when installed by an REC certified installer
  • 25 Year Linear Power Output Warranty
  • Dimensions: 1675 x 997 x 38 mm, Weight: 18.5kg

Applications

  • On-grid residential roof-tops
  • On-grid commercial/industrial roof-tops
  • Solar power plants
  • Off-grid systems

Models

  • REC285Tp2 – 285W Poly PERC Twin Peak 2 Module

Downloads

REC Twin Peak 2 Data Sheet

REC Twin Peak 2 Fact Sheet

REC Warranty